Samsung AQV12F2VE/D manual Heating Your Room, Heating temperature Fan speed when heating, Turbo

IMPORTANT

Heating Your Room

You must select the Heat mode if you wish to adjust the:

◆Heating temperature

◆Fan speed when heating

1If necessary, press the (On/Off) button.

Result: ◆ The OPERATION indicator on the indoor unit comes on.

◆The air conditioner starts up in the mode selected when the unit was last used.

◆The indoor unit beeps.

The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being:

◆Plugged in

◆Stopped

It will start up normally after a three-minute rest period.

2If the indication is not displayed at the top of the remote control, press the MODE button on the remote control one or more times until it appears.

Result: ◆ The indoor unit beeps each time you press MO DE .

◆The air conditioner starts up in Heat mode. Note You can change modes at any time.

3 To adjust the temperature, press the or buttons one or more times until the required temperature is displayed.

Possible temperatures are between 16°C and 30°C inclusive.

Result: ◆ Each time you press or :

-The temperature is adjusted by 1°C

-The indoor unit beeps

◆The air conditioner starts heating, provided that the room temperature is lower than the desired temperature (selected temperature+3°C); the fan will, however, operate.

4 Select the fan speed by pressing the	button one or more times until
the required setting is displayed:
Low
Medium
High
Automatic
Result: ◆ Each time you press	, the indoor unit beeps.

◆For the first three to five minutes, the fan operates very

slowly until the air has been sufficiently warmed. Once the correct temperature has been reached, the fan is

automatically set to the required speed.

5To control the direction of the air flow, refer to page 15.

M		FF
OD	TURBO
E		O

O	DE	TURBO	F
			OF

M			F
O	DE	TURBO
			OF

E-11