appendix
TROUBLESHOOTING
Refer to the following chart if the air conditioner operates abnormally. This may save time and unnecessary expenses.
PROBLEMSOLUTION
The air conditioner does • Because of the protective mechanism, the appliance does not start
not operate immediately operating immediately to keep the unit from overloading.
after it has beenThe air conditioner will start in 3 minutes. restarted.
The air conditioner does | • Check that the power plug is properly connected. Insert the power plug | ||||||||
not work at all. | into the wall socket correctly. |
|
|
|
| ||||
| • Check if the circuit breaker is switched off. |
| |||||||
| • Check if there is a power failure. |
|
|
| |||||
| • Check your fuse. Make sure it is not blown out. | ||||||||
|
|
|
|
| |||||
The temperature does | • Check if you selected Fan mode. |
|
|
| |||||
not change. | Press the Mode button on the remote control to select another mode. | ||||||||
|
|
| |||||||
The cool(warm) air does | • Check if the set temperature is higher (lower) than the current | ||||||||
not come out of the air | temperature. Press the Temperature button on the remote control to | ||||||||
conditioner. | change the set temperature. Press the Temperature or button to | ||||||||
| decrease or increase the temperature. |
| |||||||
| • Check if the air filter is blocked by dirt. Clean the Air filter every two weeks. | ||||||||
| • Check if the air conditioner has just been turned on. If so, wait 3 minutes. | ||||||||
|
|
|
| ||||||
The fan speed does not | • Check if you selected Auto or Dry mode. |
| |||||||
change. | The air conditioner automatically adjusts the fan speed to Auto in Auto/Dry | ||||||||
| mode. |
|
|
|
|
|
|
| |
|
|
| |||||||
Timer function does not | • Check if you pressed the Set/Cancel button on the remote control after | ||||||||
set. | you have set the time. |
|
|
|
|
| |||
|
|
| |||||||
Odors permeate in the | • Check if the appliance is running in a smoky area or if there is a smell | ||||||||
room during operation. | entering from outside. Operate the air conditioner in Fan mode or open | ||||||||
| the windows to air out the room. |
|
|
| |||||
|
|
| |||||||
The air conditioner | • A bubbling sound may be heard when the refrigerant is circulating through | ||||||||
makes a bubbling sound. | the compressor. Let the air conditioner operate in a selected mode. | ||||||||
|
|
| |||||||
Water is dripping from | • Check if the air conditioner has been cooling for an extended period of | ||||||||
the air flow blades. | time with the air flow blades pointed downwards. Condensation may | ||||||||
| generate due to the difference in temperature. | ||||||||
|
|
|
|
| |||||
Remote control is not | • Check if your batteries are depleted. |
|
|
| |||||
working. | • Make sure batteries are correctly installed. |
| |||||||
| • Make sure nothing is blocking your remote control sensor. | ||||||||
| • Check that there are no strong lighting apparatuses near the air | ||||||||
| conditioner. Strong light which comes from fluorescent bulbs or neon | ||||||||
| signs may interrupt the electric waves. |
| |||||||
|
|
|
| ||||||
|
|
|
| ||||||
SYMPTOMS | CHECK ERROR MODE (DISPLAYED) |
| MANAGEMENT | ||||||
| Some signal is displayed on the window |
|
| ||||||
The abnormal signal is | LED like | , | , | , | , |
|
| This product has something | |
, | , | , All blink, | , | , | , |
| wrong, please call the nearest | ||
displayed |
| ||||||||
, | , | , | , | , | , | , |
| contact center. | |
|
| ||||||||
|
| , | , | , | , | , |
|
|
|
|
|
|
|
|
|
|
|
|
|