Troubleshooting Guide
Before contacting the service center, check the following. It will save your time and the expense of an unnecessary call.
Problem | Explanation/Solution |
|
|
The air conditioner does not operate.
◆Check if the circuit breaker of the air conditioner is switched on.
◆Check if the air conditioner is turned on. If necessary, press the
(On/Off) button on the remote control.
◆Check if the Timer indicator on the indoor unit is on.
If so:
-Wait until the set time is reached and the air conditioner starts automatically.
-Cancel the Timer. (See pages 20 and 21 for further details)
The air conditioner does not operate with the remote control.
◆Check if there are no obstacles in front of the indoor unit.
◆Check the remote control batteries.
◆Make sure that you are within 7 meters from the indoor unit.
No beep is heard when you press the
(On/Off) button on the remote control.
◆Check if you are pointing the remote control at the remote control sensor on the right side of the indoor unit.
◆Replace the remote control batteries if necessary.
The air conditioner does not cool or heat.
◆Check if the correct operating mode has been selected (Auto, Cool, Heat).
◆The room temperature may be too low or too high.
◆Check if the air filter is dirty; refer to page 27 for cleaning instructions.
◆Check that there is no obstacle in front of the outdoor unit.
When heating, the required room temperature is never reached and the air conditioner frequently stops.
◆Check if the required temperature is set correctly.
◆Increase the fan speed.
◆If the airflow is directed upwards, set the blade downwards with the remote control.
The fan speed does not change | ◆ Check if the mode is set to the Cool, Heat or Fan mode; | |
when you press the | button. | in the Auto and Dry mode, the fan speed changes automatically. |
The airflow direction does not ◆ Check if the air conditioner has been turned on; if necessary, press
change when you press thethe 
(On/Off) button on the remote control. 
button.
The timer is not correctly triggered. ◆ Check if the timer is set correctly; see pages 20 and 21.
Odor permeates into the | ◆ You can use the Fan mode to ventilate your room. |
room during operation. |
|
|
|