Removing Excess Humidity

M

ODE

TURBO

OFF

If the atmosphere in your room is very humid or damp, you can remove excess humidity without lowering the room temperature too much.

1If necessary, press the (On/Off) button.

Result: ◆ The OPERATION indicator on the indoor unit comes on.

◆The air conditioner starts up in the mode selected when the unit was last used.

◆The indoor unit beeps.

IMPORTANT

The air conditioner is fitted with a protection mechanism

to prevent the unit from being damaged when it is started

 

 

immediately after being:

 

◆ Plugged in

 

◆ Stopped

 

It will start up normally after a three-minute.

2If theindication is not displayed at the top of the remote control, press the MODE button on the remote control one or more times until it appears.

Result: ◆ The indoor unit beeps each time you press

MO

DE .

◆The air conditioner starts up in Dry mode.

Note You can change modes at any time.

ODE

TURBO

OFF

M

ODE

TURBO

OFF

3To adjust the temperature, press the or buttons one or more times until the required temperature is displayed.

Possible temperatures are between 18°C and 30°C inclusive.

Result: ◆ Each time you press or :

-The temperature is adjusted by 1°C

-The indoor unit beeps

◆The air conditioner starts removing the excess humidity; the quantity of air is adjusted automatically.

4To control the direction of the air flow, refer to page 14.

E-12