Selecting the Automatic Operating Mode
You can start the air conditioner in Automatic mode from your remote control. In the Automatic mode, the optimum temperature and the fan speed is selected automatically.
1If necessary, press the 
(On/Off) button.
Result: ◆ The operation indicator on the indoor unit lights up.
◆The air conditioner starts up in the mode selected when the unit was last used.
◆The indoor unit beeps.
IMPORTANT The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being:
◆Plugged in
◆Stopped
lt will start up normally after three minutes.
2If the 
is not displayed at the top of the remote control,
press the 
button on the remote control one or more times until it appears. 
Result: ◆ The indoor unit beeps each time you press the 
button.
◆The air conditioner runs in AUTO mode.
Note You can change modes at any time.
3Press the 
button.
Result: | The indoor unit beeps. |
|
| The air conditioner runs in the Energy saving mode,It will run at | |
| +2°C of the standard temperature. |
|
| The outer air flow blade moves up and down. |
|
| To stop the Energy saving mode, press the | button again. |
4To adjust the temperature, press 
button once or more times to get the required temperature.The scope of the temperature adjust should between standard temperature +2°C and
