IMPORTANT

Cooling Your Room

M

ODE

TURBO

OFF

You must select the Cool mode if you wish to adjust the:

Cooling temperature

Fan speed when cooling

1If necessary, press the (On/Off) button.

Result: The OPERATION indicator on the indoor unit comes on.

The air conditioner starts up in the mode selected when the unit was last used.

The indoor unit beeps.

The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being:

Plugged in

Stopped

It will start up normally after a three-minute.

ODE

TURBO

OFF

2If the indication is not displayed at the top of the remote control, press the MODE button on the remote control one or more times until it appears.

Result: The indoor unit beeps each time you press

MO

DE .

The air conditioner starts up in Cool mode.

Note You can change modes at any time.

M

ODE

TURBO

OFF

3To adjust the temperature, press the or buttons one or more times until the required temperature is displayed.

Possible temperatures are between 18°C and 30°C inclusive.

Result: Each time you press

or

:

-The temperature is adjusted by 1°C

-The indoor unit beeps

The air conditioner starts cooling, provided that the room temperature is higher than the selected temperature; the fan will, however, operate.

4Select the fan speed by pressing the button one or more times until the required setting is displayed:

Low

Medium

 

High

 

Automatic

 

Result: Each time you press

, the indoor unit beeps.

5To control the direction of the air flow, refer to page 14.

E-10