Selecting the Cool Mode
You can select the Cool mode if you want to cool your room.
You can adjust the temperature and the fan speed when cooling.
1If necessary, press the 
(On/Off) button.
Result: ◆ The operation indicator on the indoor unit lights up.
◆ The air conditioner starts up in the mode you selected last. ◆ The indoor unit beeps.
2 Press the 
button on the remote control until 
is displayed.
Result: ◆ The indoor unit beeps each time you press the | button. |
◆ The air conditioner runs in the Cool mode. |
|
Note You can change modes at any time.
3 Press the 
button to adjust the temperature until the required temperature is displayed.
You can set the temperature between 16°C and 30°C.
Result: ◆ Each time you press the 
button: - The temperature is adjusted by 1°C
- The indoor unit beeps
◆ If the room temperature is higher than the selected temperature, the air conditioner starts cooling.
◆If the room temperature reaches the set temperature, the
air conditioner stops cooling, but the fan operates consistently.
4 Press the | button to select the fan speed until the required setting is displayed. | ||||
| Automatic (rotated : | ➜ | ➜ | ) |
|
| Low |
|
|
|
|
| Medium |
|
|
|
|
| High |
|
|
|
|
| Maximum |
|
|
|
|
Result: | ◆ Each time you press the |
| button, the indoor unit beeps. | ||
| ◆ The fan speed indicator increases and decreases |
| |||
| continuously and turns round each time you press the | button. | |||
5To control the airflow direction, refer to page 15.
