Cooling Your Room

 

 

You must select the Cool mode if you wish to lower the temperature in your

Remote Control

Control Panel

room. You can also set the fan speed.

1If necessary, press the (On/Off) button.

Result:

The operating mode indicator (COOL or FAN) on

 

the unit comes on.

 

The air conditioner starts up in the mode selected

 

 

when the unit was last used.

 

The unit beeps twice.

The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being:

Plugged in

Stopped

 

 

It will start up automatically after about three minutes.

 

2

If the COOL indicator is not lit up on the unit:

 

 

 

Press the

button on the remote control

 

 

or

 

 

 

 

 

 

 

Press the MODE button on the unit one or more times until the COOL

 

 

indicator lights up

 

 

 

 

 

Result:

The unit beeps each time you press MODE.

 

 

 

The air conditioner starts up in Cool mode.

 

 

You can change modes at any time.

 

 

 

3

To adjust the temperature, press the

or

button on the remote

 

 

control one or more times until the required temperature is displayed.

 

 

To adjust the temperature, press the

or

button on the unit one

 

 

or more times until the required temperature is displayed.

 

 

Possible temperatures are between 18°C and 30°C inclusive.

 

 

Result:

Each time you press the temperature buttons:

 

 

 

– The temperature is adjusted by 1°C and

 

 

 

 

displayed on the control panel

 

 

 

The unit beeps

 

 

 

 

 

The air conditioner starts cooling if the room temperature is

 

 

 

higher than the selected temperature.

 

4

To set the fan speed to...

Then...

 

 

 

 

High

 

 

Press the

 

button on the remote control.

 

 

 

 

 

or

 

 

 

 

 

 

 

Press the

 

on the unit until the

 

 

 

 

 

indicator lights up

 

 

Med

 

 

Press the

 

button on the remote control.

 

 

 

 

 

or

 

 

 

 

 

 

 

Press the

 

on the unit until the

 

 

 

 

 

indicator lights up

 

 

Low

 

 

Press the

 

button on the remote control.

 

 

 

 

 

or

 

 

 

 

 

 

 

Press the

 

on the unit until the

 

 

 

 

 

indicator lights up

 

 

Result:

Each time you press a button, the unit beeps.

E-8

5

To control the direction of the air flow, refer to page 10.