installing your air conditioner
SETTING UP THE AIR CONDITINER
The air conditioner must be installed horizontally or tilted slightly to the outside for proper water drainage.
Assembly for drainage
Once a location has been selected for installation, proper drainage should be established. If the drain tube and/or drain hose are not provided, call your nearest contact center.
1.Attach the gasket 1 and the drain tube 2 to the base pan hole 3 in the rear side of the unit with screws 4
| 4 |
1 | REAR SIDE |
|
3
2
2.Connect the Rubber Cap 5 to the drain tube hole.
5
On exceptionally hot and humid days the air conditioner may overflow condensed water. In hot and high humidity zones, make sure the Rubber Cap have been removed .
