Ventilating Your Room
If the air in your room is stale, you can ventilate the room using the Fan feature.
1 If you wish to discharge stale air, push the ventilation lever on the front of the
unit to the right and open position ( 
).
Result: ◆ The air inside the room circulates and stale air is discharged outside.
Otherwise, push the ventilation lever to the left and closed position ( 
).
Result: ◆ The air simply circulates inside the room.
2 | If necessary, press the |
| (On/Off) button. | Remote Control | Control Panel | |||
| ||||||||
|
|
|
|
|
| |||
| Result: ◆ The air conditioner starts up in the mode selected when |
|
|
|
|
| ||
|
|
|
|
|
| |||
|
|
|
|
|
| |||
| the unit was last used. |
|
|
|
|
| ||
|
|
|
|
|
| |||
| ◆ The unit beeps twice. |
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
3 If the fan speed(F1, F2 or F3) is not displayed on the control panel:
◆ Press the 
button on the remote control or
◆ Press the 
button on the unit one or more times until the fan speed (F1, F2 or F3) is displayed.
Result: ◆ The unit beeps each time you press the 
/ 
button. ◆ The air conditioner starts up in Fan mode.
➢◆ You can change modes at any time.
◆When the air conditioner is in the Fan mode, the temperature cannot be set or displayed.
4 To set the fan speed:
◆ Press the 
,
or
button on the remote control as desired. or
◆Press the 
button on the unit one or more times until the
desired fan speed(F1, F2 or F3) is displayed.
Low
Medium
High
5To control the direction of the air flow, refer to page 11.
