Connections
Putting on the Cover-Jack
To access the connection terminals, slide the cover jack off the player.
Replace it when you are finished making connections.
Installing the Blu-ray Disc Player
You can install your player on a stand or hang it on the wall.
When installing the player, please make sure that enough space is left to open the door. If you do not, player will not operate normally.
Installation Precautions
•If you install your palyer on a wall, the wall must be flat and vertical.
•Avoid installing the player in areas with high temperature or humidity, or on a wall that cannot sustain the weight of the set.
•Check the strength of the wall. If the strength of the wall is insufficient to support the player, make sure to reinforce the wall before installing.
•Check the compostion of the wall. If the wall is made of plaster board, marble, or iron board, purchase and use the appropriate mollies and fixing screws.
•Cables connecting to external devices are to be connected to the player before you install it.
•To prevent electric shock, be sure to turn off the player before you install it.
•Do not hang on the installed player and avoid hitting it.
•Secure the unit firmly to the wall so that it does not fall off. If the unit falls off, it may result in injury or in damage to the product.
•If you install the player on a wall, please make sure that a child does not pull any of connecting cables, as it may cause the player to fall.
Case 1 : Installing on the stand
To install on the Stand, insert the Stand Holder into the bottom slot of the
28 English
