Samsung BD-D7500/XN, BD-D7500/ZF, BD-D7500B/ZF Setting Up the Wireless Network Connection Auto

Setup

3.On the dialog that appears, click the Local Area Connection or Wireless Network Connection depending on your network connection.

4.On the Support tab, click the Details button. The Network settings are displayed.

✎NOTE✎

`` Depending on your Windows version, the information may differ.

To enter the Network settings into your player, follow these steps:

1.	Press the ▲▼ buttons to select Wired, and
2.	then press the		ENTER button.
	Press the ◄► buttons to select IP Settings,
3.	and then press the ENTER button.
	On the Network Status screen, select Cancel,
	and then press Enter.
	Settings			IP Settings
	Display	IP Mode				Manual
	Audio			0	.			.	0
	Network	IP Address				0 .	0
	System	Subnet Mask		0	.	0 .	0	.	0
	Language	Gateway		0	.	0 .	0	.	0
	Security	DNS Mode				Manual
		DNS Server		0	.	0 .	0	.	0
	General
				OK
	Support				"Enter			'Return
				>Move
4.	Press the ENTER button to select IP Mode.
5.	Press the ▲▼ buttons to select Manual, and
6.	then press the		ENTER button.
	Press the ▼ button to go to the first entry field
7.	(IP Address).
	Use the number buttons on your remote to
8.	enter numbers.
	When done with each field, press the ►
	button to move successively to the next field.
	You can also use the other arrow buttons to
9.	move up, down, and back.
	Enter the IP Address, Subnet Mask, and
	Gateway values.

10.Press the ▼ button to go to DNS Mode.

11.Press the ▼ button to go to the first DNS entry field. Enter the numbers as above.

12.Press the ENTER button to select OK. The Network Status screen appears. The player connects to the network after the network connection is verified.

Wireless Network

You can setup a wireless network three ways:

•Wireless (General)

•Using WPS(PBC)

•One Foot Connection

Wireless (General) includes both Automatic and Manual setup procedures.

Setting Up the Wireless Network Connection - Auto

Most wireless networks have an optional security system that requires devices that access the network to transmit an encrypted security code called an Access or Security Key. The Security Key is based on a Pass Phrase, typically a word or a series of letters and numbers of a specified length you were asked to enter when you set up security for your wireless network. If you use this method of setting up the network connection, and have a Security Key for your wireless network, you will have to enter the Pass Phrase during the Auto setup process.

1.Press the ▲▼ buttons to select Wireless (General).

Settings		Network Settings
Display
Audio Select a network connection type.
Network	Wired
System
	Wireless	Set up wireless network by selecting your Wireless
Language(General)
Security	WPS(PBC)	Router. You may need to enter security key depending
General		on the setting of the Wireless Router.
	One Foot
Support Connection		>Move "Enter 'Return

2.Press the ENTER button.

When done, it displays a list of the available networks.

40 English