Settings
Wi-Fi Direct
The Wi-Fi Direct function allows you to connect Wi-Fi Direct devices to the player and each other using a peer-to-peer network, without a wireless router.
NOTEs
\\ Some Wi-Fi Direct devices may not support the AllShare function if connected via Wi-Fi Direct. If this is the case, it is advisable to change the network connection method between devices.
\\ Bluetooth transmissions can interfere with the Wi-Fi Direct signal. Before you use the Wi-Fi Direct function, we strongly recommend that you turn off the Bluetooth function of any active mobile device.
1.Turn on the Wi-Fi direct device and activate its Wi-Fi Direct function.
2.In the Home screen, select Settings, and then press the v button.
3.Select Network, and then press the v button.
4.Select Wi-Fi Direct, and then press the v button.
The Wi-Fi Direct devices that you can connect appear.
5.You have three ways to complete the Wi-Fi connection:
•Through the Wi-Fi device.
•Through the player using PBC.
•Through the player using a PIN.
Each is covered below.
Through the Wi-Fi Device
1.On the Wi-Fi device, follow the procedure on the device for connecting to another Wi-Fi Direct device. See the device's user manual for instructions.
2.When you have completed the procedure, you should see a pop-up on your TV screen saying that a device that supports Wi-Fi Direct has requested to connect. Select OK, and then press the v button to accept.
3.The Connecting pop-up appears, followed by the Connected pop-up. When it closes, you should see the device listed on the Wi-Fi Direct screen as connected.
Through the Player Using PBC
1.Select the Wi-Fi Direct device you want to connect to this player, and then press the v button. The PBC/PIN pop up appears.
2.Select PBC, and then press the v button. The PBC pop-up appears.
3.Press the PBC button on the Wi-Fi Direct device within 2 minutes.
4.The Connecting pop-up appears, followed by the Connected pop-up. When it closes, you should see the device listed on the Wi-Fi Direct screen as connected.
Through the Player Using a PIN
1.Select the Wi-Fi Direct device you want to connect to this player, and then press the v button. The PBC/PIN pop up appears.
2.Select PIN, and then press the v button. The PIN pop-up appears.
3.Note the PIN code in the pop-up, and then enter it into the appropriate field in the Wi-Fi Direct device you want to connect.
4.The Connecting pop-up appears, followed by the Connected pop-up. When it closes, you should see the device listed on the Wi-Fi Direct screen as connected.
NOTEs
\\ The current wired or wireless network connection will be
disconnected when you use the Wi-Fi Direct function.
\\ Text files, such as files with a .TXT or .DOC extension, will not display when you are using the Wi-Fi Direct function.
