Samsung BD-J5500/EN Wired Network Settings, Manual Network Setup, Network Test, Network Status

Network Settings

Please contact your ISP to find out if your IP address is static or dynamic. If it is dynamic - and most are - we recommend using the Auto procedure for network setup. This is easiest and will work in the majority of cases. If it is static, you must use the manual set up procedure.

Network setup directions start below. ✎✎ NOTES

`` This unit can only be connected to a Network via a wired connection.

Wired Network Settings

111In the Home menu, press the ▲▼◄► buttons to select Settings, and then press the v button.

222Press the ▲▼ buttons to select Network, and then press the v button.

333Press the ▲▼ buttons to select Wired Network Settings, and then press the v button. The Wired Network Settings screen appears.

Settings

Picture	Wired Network Settings
Sound Internet Protocol Setup : Auto						\
Network	IP Address	:	0	0	0	0
System	Subnet Mask	:	0	0	0	0
Language Gateway		:	0	0	0	0
SecurityDNS		: Auto		0	0	0
General	DNS Server	:	0
Support		> Move " Select ' Return

444In the Internet Protocol Setup field, select Auto if it is not selected. (Press v to select Auto, and then press v.)

555The Auto Function acquires and fills in the values for IP Address, Subnet Mask, etc., automatically.

✎NOTES✎

`` This process can take up to five minutes.

666After the Network Function has acquired the network values, press the RETURN button.

777Select Network Test, and then press v to ensure the player has connected to your network.

888When the Network Test is complete, press the RETURN twice to return to the Main Menu.

999If the Network Function does not acquire the network values, go to the directions for Manual Setup.

Manual Network Setup

Before you start manual network setup, you need the network setting values.

To get the network setting values, contact your ISP (Internet Service Provider) or your network administrator.

To enter the Network Settings into your player, follow these steps:

111 In the Home menu, press the ▲▼◄► buttons to select Settings, and then press the v button.

222 Press the ▲▼ buttons to select Network, and then press the v button.

333 Press the ▲▼ buttons to select Wired Network Settings, and then press the v button. The Wired Network Settings screen appears.

444 Select the Internet Protocol Setup field, and then press the v button.

555 Press the ▲▼ buttons to select Manual, and then press the v button.

666 Press the ▼ button to go to the first entry field (IP Address).

777 Use the number buttons on your remote to enter numbers.

888 When done with each field, use the ► button to move to the next field. You can also use the other arrow buttons to move up, down, and back.

999 Enter the IP Address, Subnet Mask, and Gateway values in the same way.

1111Press the ▼ button to go to DNS.

1111Press the ▼ button to go to the first DNS entry field.

1111Enter the numbers as above.

1111Press the RETURN button on your remote control.

1111Run a Network Test to ensure the player has connected to your network.

Network Test

Use this menu item to check whether your network connection is working or not.

Network Status

Use to check whether a connection to a network and the Internet has been established.

Device Name

Device Name function allows you to change player's name by selecting from device name list.

BD-Live Internet Connection

Set to allow or prohibit an Internet connection when you use the BD-LIVE service.

•• Allow (All) : The Internet connection is allowed for all BD-LIVE contents.

•• Allow (Valid Only) : The Internet connection is allowed only for BD-LIVE contents containing a valid certificate.

•• Prohibit : No Internet connection is allowed for any BD-LIVE content.

✎✎ NOTES

`` What is a valid certificate?

When the player uses BD-LIVE to send the disc data and a request to the server to certify the disc, the server uses the transmitted data to check if the disc is valid and sends the certificate back to the player.

`` The Internet connection may be restricted while you are using BD-LIVE contents.

Using BD-LIVE™

Once the player is connected to the network, you can enjoy various movie-related service contents using a BD-LIVE compliant disc.

111Attach a USB memory stick to the USB jack on the front of the player, and then check its remaining memory. The memory device must have at least 1GB of free space to accommodate the BD-LIVE services.

222Insert a Blu-ray Disc that supports BD- LIVE.

333Select an item from various BD-LIVE service contents provided by the disc manufacturer.

✎NOTES✎

`` The way you use BD-LIVE and the provided contents may differ, depending on the disc manufacturer.

13