37
English
04 Advanced Features
Anynet+ Menu
The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV.
Anynet+ Menu Description
View TV Changes Anynet+ mode to TV broadcast mode.
Device list Shows the Anynet+ device list.
(device_name) MEnU Shows the connected device menus. E.g. If a DVD recorder is connected, the disc menu of
the DVD recorder will appear.
(device_name) InFO Shows the play menu of the connected device. E.g. If a DVD recorder is connected, the
play menu of the DVD recorder will appear.
Recording: (*recorder) Starts recording immediately using the recorder. (This is only available for devices that
support the recording function.)
stop Recording: (*recorder) Stops recording.
Receiver Sound is played through the receiver.
If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device is
connected, it will be represented as (*device_name).
setting Up Anynet+ ¦
MEnU
Om
→ Application → Anynet+ (hDMI-CEC) → EnTER
E
setup ■
Anynet+ (hDMI-CEC) (Off / On): To use the Anynet+ Function, Anynet+ (hDMI-CEC) must be set to On.
When the
✎
Anynet+ (hDMI-CEC) function is disabled, all the Anynet+ related ope rations are deactivated.
Auto Turn Off (no / Yes): Setting an Anynet+ Device to turn off automatically when the TV is turned off.
If
✎
Auto Turn Off is set to Yes, runnin g external devices will tur n off at the same time as the TV powe rs off.
However, a device may not turn off if recording is in p rogress.
May not be enabled depending on the d evice.
✎
switching between Anynet+ Devices ¦
1. Anynet+ devices connected to the TV are listed.
If you cannot find a device you want, press th e red button to refresh the list.
✎
2. Select a device and press the EnTER
E
button. You can switch to the selected device.
Only when you set
✎
Anynet+ (hDMI-CEC) to On in the Application menu, the Device list menu appears.
Switching to the selected device may take u p to 2 minutes. You cannot cancel the operatio n during the switching
x
operation.
If you have selected external input mo de by pressing the
x
sOURCE button, you cannot use the Anynet+ function.
Make sure to switch to an Anynet+ device by using the Dev ice list.
Recording ¦
You can make a recording of a TV Program using a Samsung recorder.
1. Select Recording.
When there are more than two recordi ng devices
✎
When multiple recording devic es are connected, the recording d evices are listed. Select one re cording device in
x
the Device list.
When the recording device is not dis played, select
✎
Device list and press the Red but ton to search devices.
2. Press the EXIT button to exit.
You can record the source streams by selecting
✎
Recording: (device_name).
Pressing the
✎�
(REC) button will record whatever you are cu rrently watching. If you are watching vide o from
another device, the video from the dev ice is recorded.
Before recording, check whether the a ntenna jack is properly conn ected to the recording device. To properly
✎
connect an antenna to a recording dev ice, refer to the recording device’s users ma nual.
BN68-02604B_Eng.indb 37 2010-09-01 �� 9:58:39