38
English
Advanced Features
listening through a Receiver ¦
You can listen to sound through a receiver (i.e Home Theater) instead of the TV speaker.
1. Select Receiver and set to On.
2. Press the EXIT button to exit.
If your receiver supports audio o nly, it may not appear in the device list.
✎
The receiver will work when you have pr operly connected the optica l in jack of the receiver to the
✎
DIgITAl AUDIO
OUT (OPTICAl) jack of the TV.
When the receiver (i.e Home Theater) is s et to
✎
On, you can hear sound output from the TV ’s Optical jack. When
the TV is displaying a DTV (air) sign al, the TV will send out 5.1 channel sound to the re ceiver. When the source is a
digital component such as a DVD and i s connected to the TV via HDMI, onl y 2 channel sound will be hea rd from
the receiver.
nOTE
✎
You can only control Anynet+ devices using the T V remote control, not the buttons on the T V.
x
The TV remote control may not work under c ertain conditions. If thi s occurs, reselect the Anynet+ devi ce.
x
The Anynet+ functions do not operate with oth er manufacturers’ products.
x
Troubleshooting for Anynet+ ¦
Problem Possible solution
Anynet+ does not work. Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only.•
Only one receiver (home theater) can be connected.•
Check if the Anynet+ device power cord is properly connected.•
Check the Anynet+ device’s Video/Audio/HDMI cable connections.•
Check whether • Anynet+ (hDMI-CEC) is set to On in the Anynet+ setup menu.
Check whether the TV remote control is in TV mode.•
Check whether the remote control is Anynet+ compatible.•
Anynet+ does not work in certain situations. (Searching channels, operating • Media Play or Plug & Play
(initial setup), etc.)
When connecting or removing the HDMI cable, please make sure to search devices again or turn your •
TV off and on again.
Check if the Anynet+ Function of Anynet+ device is set on.•
I want to start Anynet+. Check if the Anynet+ device is properly connected to the TV and check if the • Anynet+ (hDMI-CEC) is
set to On in the Anynet+ Setup menu.
Press the • TOOls button to display the Anynet+ menu and select a menu you want.
I want to exit Anynet+. Select • View TV in the Anynet+ menu.
Press the • sOURCE button on the TV remote control and select a device other than Anynet+ devices.
Press • > Ch <, Ch lIsT, PRE-Ch, and FAV.Ch to change the TV mode. (Note that the channel
button operates only when a tuner-embedded Anynet+ device is not connected.)
The message ‘Connecting to
Anynet+ device...’ appears on
the screen.
You cannot use the remote control when you are configuring Anynet+ or switching to a view mode.•
Use the remote control when the Anynet+ setting or switching to view mode is complete.•
The Anynet+ device does not
play.
You cannot use the play function when • Plug & Play (initial setup) is in progress.
The connected device is not
displayed.
Check whether or not the device supports Anynet+ functions.•
Check whether or not the HDMI cable is properly connected.•
Check whether • Anynet+ (hDMI-CEC) is set to On in the Anynet+ setup menu.
Search Anynet+ devices again.•
You can connect an Anynet+ device using the HDMI cable only. Some HDMI cables may not support •
Anynet+ functions.
If it is terminated by an abnormal situation such as disconnecting the HDMI cable or power cord or a •
power failure, please repeat the device scan.
The TV Program cannot be
recorded.
Check whether the antenna jack on the recording device is properly connected.•
The TV sound is not output
through the receiver.
Connect the optical cable between TV and the receiver.•
BN68-02604B_Eng.indb 38 2010-09-01 �� 9:58:39