Quick Setup Guide
Congratulations on the purchase of your new Samsung TV. Read this setup guide to get your TV up and running quickly.
Step 4: Connect External Devices
Connecting an AV device
Connecting an audio device (Home Theater, etc.)
Connect your TV to your Home Theater or other audio device to enjoy enhanced Sound quality.
STOP | ||
Samsung Electronics America, Inc. | ||
Please do not return this unit. | 85 Challenger Road Ridgefield Park, NJ | |
Samsung Electronics Canada Inc. | ||
If you have problems operating your | 55 Standish Court Mississauga, Ontario L5R 4B2 | |
TV, call: | Call Center hours of operation: | |
AM EST. | ||
To register this product, visit: www.samsung.com/ | ||
For web support please visit: | ||
register. | ||
www.samsung.com/support | ||
|
Use one of the connections below to connect your TV to an external A/V device. We recommend using HDMI for the highest picture quality.
✎✎When connecting to AV IN on the back of your TV, attach the video cable (yellow) to the green jack next to the AV IN label. The jack will not match the color of the video cable (yellow).
HDMI Cable (Not Supplied)
Best Connection
HD connection (up to 720p/1080i)
Using an HDMI Cable
DVD,
Analog Audio connection
Using an Audio Cable
Amplifier / DVD home theater
Audio Cable (Not Supplied)
AUDIO IN
Digital Audio connection
HDMI OUTDevice
Using an Optical Cable
Optical Cable (Not Supplied)
Digital Audio System
Step 1: Install the Stand
Follow the steps below to connect the TV to the stand.
✎✎NOTE
xx Make sure to distinguish between the front and back of the Stand and Guide Stand when assembling them.
xx Make sure that at least two people lift and move the PDP TV.
xx Stand the product up and fasten the screws. If you fasten the screws with
the PDP TV placed down, it may lean to one side. |
| |
1 With your TV upright, connect the | 2 Fasten two screws (M4 X L16) at | |
TV to the Stand as shown. | position 1, and then fasten two | |
| screws (M4 X L16) at position 2. | |
s |
|
|
s | s |
|
s |
| |
|
| |
s | s | s |
| ||
|
| s |
| Front | 2 |
|
| |
Rear |
| 1 |
|
|
Video Cable
(Not Supplied)
Lowest Quality Connection
Audio/Video connection (480i only)
Using an Audio/Video Cable
DVD,
Device | VIDEO OUT | AUDIO OUT |
|
Audio Cable
(Not Supplied)
3 | HDMI to DVI Cable | Very Good Connection | |
IN | (Not Supplied) |
|
|
HDMI |
| HD connection (up to 720p/1080i) | |
|
| ||
|
| Using an HDMI to DVI Cable | |
|
| DVI OUT |
|
|
| AUDIO OUT | Device |
Audio Cable (Not Supplied) |
|
| |
| Good Connection |
| |
| Component connection (up to 720p/1080i) | ||
|
| Using a Component Cable | |
|
| COMPONENT OUT | DVD, |
|
| STB satellite receiver, VCR, | |
|
|
| |
Component Cable |
|
|
|
(Not Supplied) |
|
| Device |
|
| AUDIO OUT | |
|
|
| |
OPTICAL
Connecting a PC
Connect your TV to a PC to use it as a Monitor.
|
|
| HD connection |
Audio Cable (Not Supplied) |
| Using an HDMI to DVI Cable | |
|
|
| AUDIO OUT |
|
|
| DVI OUT |
HDMI to DVI Cable (Not Supplied)
Using a
PC OUT
Audio Cable (Not Supplied)
AUDIO OUT
Step 2: Install the Batteries into the Remote
To install batteries into your remote control, follow these steps:
1.Lift the cover on the back of the remote upward as shown in the figure to the
right.
2. Install two AAA batteries.
✎✎ Make sure to match the +
Step 5: Run Plug & Play
When you turn on your TV for the first time, it automatically launches the Plug & Play function. With Plug & Play, you can select the On Screen Display language, set the clock mode, and launch the TV’s channel memorizing process.
It also displays connection instructions similar to those in this guide.
To navigate while Plug & Play is running, press the Up, Down, Left or Right arrow buttons on your remote. To make a selection, press the ENTEREbutton.
✎✎Most cable systems are Standard(STD) systems, If you are not sure about what kind of cable system you have, contact your cable company.
✎✎If your TV is attached to a cable or satellite box, skip Steps 3 through 5. After Plug & Play is complete, set your TV to Channel 3 or 4, according to the directions for your cable or satellite box.
7 Select the time zone in which you live, and then press the ENTEREbutton.
8 After the time zone screen, The connection method for best HD screen quality is displayed. Press Right arrow button on your remote to view each screen in succession. Press the Blue button to skip this section.
and - ends of the batteries to the diagram in the battery compartment.
3.Replace the cover.
Step 3: Connect Power and Antenna or Cable
VHF/UHF Antenna
To skip a screen, press the MENU button. To turn on your TV, press the POWER button on the remote or on the TV. To run Plug & Play, follow these steps:
1 Using your remote control, select |
| P |
|
|
| Plug & Play |
|
| |
Select Language of the OSD. |
|
| ||
the language for the On Screen | English |
| ||
|
|
| ||
Display (OSD), and then press | Language | : | Español |
|
the ENTEREbutton. |
|
| Français |
|
|
|
| UMove | EEnter |
4
5
The TV memorizes the available channels. This process can take up to 45 minutes.
Plug & Play
| Auto Program in Progress. |
|
| |
| DTV Air : | Air : |
|
|
| DTV Cable : | Cable : | Cable : 35 | |
|
|
|
| 48% |
|
|
|
| |
|
|
|
|
|
Stop
EEnter mSkip
9 The Enjoy your TV. screen appears. Then press the ENTEREbutton.
If You Want to Rerun Plug & Play
1. | Press the SOURCE button on your remote, then select TV mode. |
2. | Press the MENU button on your remote to display the menu. |
3. | Press the ▲ or ▼ button to select Setup, and then press the ENTERE |
| button. |
4. | Press the ENTEREagain to select Plug & Play. |
Antenna Cable |
| Connect Ant In to | ||
|
| |||
(Not Supplied) |
|
| • | Wall cable jack |
|
|
| ||
|
|
| • | VHF/UHF Antenna |
or | • | Cable or Satellite box | ||
|
|
| ||
Ant or Cable Out
Use a 75 ohm (round) cable.
Make sure the AC power cord is plugged in securely to the wall outlet and the TV.
2 Select Home Use, and then press the ENTEREbutton. If you select Store Demo, the TV will reset your picture and audio settings every 30 minutes.
3 Select the Antenna source
Plug & Play
Select ‘Home Use’ when installing this TV in your home.
Store Demo | Home Use |
|
|
| LMove EEnter |
|
|
| Plug & Play |
After the TV has memorized the channels, choose the Clock Mode. Select Auto if you have a digital channel in your area. Select Manual if you don’t, or if you have a cable or satellite box. When done, press the ENTEREbutton.
✎✎ If you select Manual, the clock setting screen appears.
Plug & Play |
|
|
Set the Clock Mode. |
|
|
Clock Mode | Auto |
|
Manual |
| |
|
| |
UMove | EEnter | mSkip |
to memorize, you must select Antenna Source to same type as your cable system type. After selecting source, select Start; then press the ENTEREbutton on your remote.
| Select the Antenna source to memorize. | ||
|
|
|
|
| Air | Start | |
| Cable | Start | |
| Auto | Start | |
|
|
|
|
| UMove | EEnter mSkip | |
6 Select the daylight savings time | Plug & Play |
|
| |
setting: Off, On or Auto and then | Set to daylight saving time. | Off |
| |
press the ENTEREbutton. |
|
| ||
DST | On |
| ||
✎✎This function is only available |
| |||
|
| |||
| Auto |
| ||
when the Clock Mode is set to | UMove | EEnter | mSkip | |
Auto. | ||||
|
|
|
