Samsung BN68-02618A-03 setup guide Remote Control, The Internet@TV and Media Play Features

Step 6: Remote Control

Remote Control Buttons and Functions

✎✎This is a special remote control for the visually impaired and has Braille points on the Power, Channel and Volume buttons.

Step 7: The Internet@TV and Media Play Features

Your TV’s Internet@TV feature (IPTV) lets you connect to an ever-expanding portal of your favorite on-line digital content. Customizable widgets give you access to Blockbuster, Facebook, YouTube, Flickr, Netflix* and more - all on your HDTV. The Media Play feature lets you connect to your PC through your home network and stream PC audio and video files to your HDTV using your remote. To use IPTV or Samsung PC Share Manager, you must connect your TV to your network. You can attach the TV to your network in two ways, by cable, using CAT 5 cable, or wirelessly, using a Samsung

Network Connection - Wireless

You can connect your TV to your LAN through a standard wireless router or modem. To connect wirelessly, you must first attach a “Samsung Wireless LAN Adapter” (WIS09ABGN, WIS09ABGN2, WIS10ABGN - sold separately) to either the USB 1 (HDD) or USB 2 port on the back of your TV. See the illustration below.

	Wireless IP sharer		Samsung Wireless
	(AP having DHCP	TV Rear Panel
The LAN Port on the Wall	server)		LAN Adapter

Turns the TV on and off.

Displays and selects the available video sources.

Press to directly access channels.

Press to select additional channels (digital) being broadcasted by the same station. For example, to select channel “54-3”, press “54”, then press “–” and “3”.

Adjusts the volume.

Brings up the OSD.

Displays the Content View, which includes Channel List, Internet@TV, Media Play, AllShare and 3D.

Quickly select frequently used functions.

POWER ON/OFF

SOURCE

PRE-CH

MUTE

CH LIST

MENU @TV

CONTENT INTERNET

TOOLSINFO

Turns the remote control light on or off. When on, the buttons become illuminated for a moment when pressed. (Using the remote control with this button set to ON will reduce the battery usage time.)

Returns to the previous channel.

Cuts off the sound temporarily.

Changes channels.

Displays the channel list on the screen.

Link to various internet services.

Displays information on the TV screen.

Selects the on-screen menu items and changes the values seen on the menu.

Wireless LAN Adapter. Instructions for both connection methods are below.

Network Connection - Wired

There are two main ways to connect your TV to your network using cable, depending on your network setup. They are illustrated below:

The Modem Port on the Wall	External Modem	TV Rear Panel
(ADSL / VDSL / Cable TV)
Modem Cable (Not Supplied)	LAN Cable (Not Supplied)

The LAN Port on the Wall	TV Rear Panel
	LAN Cable (Not Supplied)

Configuring the Network Connection - Wired

or

LAN Cable (Not Supplied)

Samsung’s Wireless LAN adapter is sold separately and is offered by select retailers, Ecommerce sites and Samsungparts.com. Samsung’s Wireless LAN adapter supports the IEEE 802.11A/B/G and N communication protocols. Samsung recommends using IEEE 802.11N. When you play the video over a IEEE 802.11B/G connection, the video may not play smoothly.

Most wireless network systems incorporate a security system that requires devices that access the network through an access point or AP (typically a wireless IP Sharer) to transmit an encrypted security code called an access key.

If Pure High-throughput (Greenfield) 802.11n mode is selected and the Encryption type is set to WEP, TKIP or TKIPAES (WPS2Mixed) for your AP, Samsung TVs will not support a connection in compliance with new Wi-Fi certification specifications.

Configuring the Network Connection - Wireless

The instructions below are for networks that use the Dynamic Host Configuration Protocol (DHCP) to configure network connections automatically. If your have a

Returns to the previous menu.

These buttons are for the Channel List, Internet@TV, Media Play menu, etc.

Use these buttons in Media Play and Anynet+ (HDMI-CEC) modes. (�: Controls recording for Samsung recorders that have the Anynet+ feature)

RETURNEXIT

A B C D

MEDIA.P YAHOO!

FAV.CH P.SIZE CC

Exits the menu.

MEDIA.P: Displays Media Play.

YAHOO!: Runs the Yahoo widget.

3D: Sets the 3D mode.

FAV.CH: Displays Favorite Channel Lists on the screen.

P.SIZE: Selects the picture size.

CC: Controls the caption decoder.

Most home networks use the Dynamic Host Configuration Protocol (DHCP) to configure network connections. Home networks that support DHCP automatically provide the IP address, subnet mask, gateway, and DNS values your TV needs to access the Internet so you don’t have to enter them manually.

To configure your network connection for a network that uses DHCP, follow these steps:

Network Setup

Internet Protocol Setup	: Auto		r
IP Address	:
Subnet Mask	:
Gateway	:
DNS	: Auto
DNS Server	:
UMove EEnter		RReturn

Static IP network, see your user’s manual for configuration instructions. To configure your network connection for a network that uses DHCP, follow these steps:

1.Connect your TV to your network as shown in the illustrations above.

2.Turn on your TV, press the MENU button on your remote, and the select Setup

→ Network.

3.Set the Network Type to Wireless if it is not already set to Wireless.

4.Select Network Setup. The Network Setup screen appears.

5. On the Network Setup menu,		Network Setup
select an AP (Access Point) or ad	Select a network	: Not Selected r
hoc network. If you have selected

Changing Channels and Adjusting the Volume

Adjust the volume by pressing the Volume button			Change the channels by pressing the Channel button on the remote.
on the remote.
			✎✎If your TV is attached to a cable or satellite box, change the channel using
	CH LIST
	MENU	@TV	the box’s remote.

✎✎You can also change the channels by pressing the zbutton on the front panel of your TV and adjust the volume by pressing the ybutton.

1.Connect your TV to your network as shown in one of the illustrations above.

2.Turn on your TV, press the MENU button on your remote, and then select Setup → Network.

3.Set the Network Type to Wired if it is not already set to Wired.

4.Select Network Setup. The Network Setup screen appears.

5.On the Network Setup menu, set Internet Protocol Setup and DNS to Auto. Auto acquires and enters the necessary internet values automatically.

6.Select Network Test to check Internet connectivity.

✎✎Some networks are Static IP networks. If your network is a Static IP network, you can not use DHCP to configure the network connection. Instead, you must enter the IP Address, Subnet Mask, Gateway, and DNS Server manually. For instructions explaining how to configure a Static IP network,

a network with a security key, the	Internet Protocol Setup		: Auto
Security Key screen appears.	IP Address		:
			:
6. Enter the security key using the	Subnet Mask
	Gateway		:
numbers on the remote, and then
	DNS		: Auto
press the Blue button on your
	DNS Server		:
remote.
✎✎ If your network uses WEP		PBC(WPS) UMove. EEnter RReturn

security encryption, 0~9 and

A~F will be available on the Security Key screen. Use the Direction button on your remote to move to the characters and the enter key to select them.

7. On the Network Setup menu, set Internet Protocol Setup and DNS to Auto.

The Auto acquires and enters the necessary internet values automatically.

Viewing the On Screen Menus

To view the On Screen Menus, follow these steps:	MENU	@TV
1. Turn on your TV, press the MENU button on your	CONTENT	INTERNET
remote. The main menu appears.	TOOLS	INFO

Selecting a Source
To watch a movie on your Blu-ray player or watch
your favorite TV show, you must select the correct	POWER	ON/OFF
source. A source is a device, such as a Blu-ray/DVD
player, a cable/satellite box, antenna or a cable TV		SOURCE

see your user’s manual.

Starting Internet@TV

To view the On Screen	Recommended
Menus, follow these steps:

8. Select Network Test to check internet connectivity.

✎✎For more information, see your user’s manual.

Connecting a USB Device for Media Play

The menu’s left side has the following menu

options: Picture, Sound, Channel, Setup, Input, Application, and Support.

2.Press the ▲ or ▼ button on your remote to select a menu option, and then press the ENTEREbutton.

3.When done using the menu, press the EXIT button on your remote to exit.

input. Sources can be connected to your TV through

the HDMI, DVI, Component, Composite, or D-sub

connections, or through the Antenna or Cable In connections.

To view the signal from a source connected to the HDMI, DVI, Component, Composite, or D-sub jack, press the SOURCE button on your remote. Each time you press the SOURCE button, you change to a different source.

1.	Turn on your TV, press
	the MENU button on		My Applications			by Date 1/1
	your remote, then select
	Application → Content
	View.
2.	Press the ◄ or ► button
	to select Internet@	Samsung Apps Settings
	TV, then press the			Login	Mark as Favorite	Sort by RReturn

ENTEREbutton. The

USER TERMS and PRIVACY POLICY windows appears, then select Yes.

3.Follow the directions on your screen to set up Internet@TV. For detailed instructions, see your Owner’s Manual.

✎✎For best Internet@TV results, your broadband company should provide sustained download speeds of 3.5 mb/sec or more.

You can enjoy photo, music, and movie files stored on a USB device by connecting it to the TV and using

the Media Play feature. For Media Play operating instructions, please see your Owner’s Manual.

MediaPlay

Videos

SUM Change Device View Devices EEnter RReturn

BN68-02618A-03