66
7 Setup and Reset
7 Setup and Reset
7.1 HUB
Configure the settings to use the HUB function on the product.
zRefer to "2.1 About "Central Station"" for details about how to use the HUB function.
zTo open the HUB settings screen, press HUB on the stand.
7.1.1 Auto Wireless Detection
If the product is connected to a PC via Wireless USB, it will automatically detect the Wireless USB signal
and change the input source to Wireless USB mode.
Configuring Auto Wireless Detection
1Press [ ] on the product.
2Press [ ] to move to SETUP&RESET and press [ ] on the product.
3Press [ ] to move to HUB and press [ ] on the product.
4Press [ ] to move to Auto Wireless Detection and press [ ] on the product. The following screen
will appear.
zOff: Deactivate the auto wireless detection mode.
zOn: Automatically detect a Wireless USB signal and change the input source to Wireless USB
mode.
5Press [ ] to move to the option you want and press the [ ].
6The selected option will be applied.
7.1.2 Wireless Connection
You can view the status of the Wireless USB connection between the product and a PC.
Select the Wireless Connection option. The input source will change to Wireless USB mode.
zThe connection status will be shown even when the input source is not Wireless USB mode.
zSelecting Wireless Connection when a Wireless USB connection is established will change the
input source to Wireless USB mode.
m
Return EnterAdjust
HUB
Auto Wireless Detection
Wireless Connection
USB Connection
Analog
HDMI
USB Super Charging
Wireless ID
Off
On
Disconnected
Disconnected
2II
Disconnected