34
ENG
35
(BW)
BURST OFF
RET
(COLOR)
WHITE BAL ATW2
RET
Even in night mode, you can see colour images in bright illumination. Therefore you can select
any of [COLOR…] and [BW…]. In case of [COLOR…], you have to set the colour temperature
for white balance. You can also specify the settings for red and blue colours on your own. In
case of [BW...], the burst signals are output with the BW Composite Video signals when the
BURST is set to [ON]. And no burst signals are output when the BURST is set to [OFF].
Note
When it is set to [NIGHT], [WHITE BAL] of the video set will be displayed as “---“. You cannot adjust the
settings manually.
When it is set to [COLOR] in the NIGHT mode, the white balance will be setting as the same value in [COLOR]
mode.
AUTO…This automatically converts the DAY mode to NIGHT mode and vice versa depending on
illumination. In low illumination, it removes the IR ltering function to raise the sensitivity.
Otherwise, it activates the IR ltering function to lower the sensitivity. If you press the ENTER
when the AUTO… submenu is selected, the corresponding screen appears.