![Double Quantity Pad Programming](/images/new-backgrounds/67621/6762131x1.webp)
Double Quantity Pad Programming
GB
+ 30sec |
P |
+ 30sec
START BUTTON
1Hold down and then press
pad. Hold together for 2 seconds.
2Select desired program code by using NUMBER pads.
3Press NUMBER pads to set the magnification factor within the range from 1.00 to 9.99.
➢Default factor is 1.65 preset from the manufacturer for increasing the cooking time.
Make sure that you set a correct factor between 1.00 and 9.99 for each memory code number.
4Press button.
5Press pad to exit the programming mode.
➢Though you can successfully set a double quantity factor whose setting might result in excess of the maximum time allowed for each power level, the oven does not operate exceeding the maximum time.
Double Quantity Factor Editing
Feature | Key Entry | Display | Remark |
| Hold down CANCEL and then |
| Hold down for 2 sec. |
| pad. |
|
|
| Code No. |
| After 1 sec, default value shows |
|
|
| in the display window. |
| (Input desired factor value.) |
| 1.00 ~ 9.99 available |
|
|
| (Change the factor if required.) |
|
|
| If you don’t want to change |
| START |
| more, press CANCEL to exit |
Double Quantity |
|
| the editing mode. |
Factor Edit |
|
|
|
| New Code No. |
| Skip this step if not necessary. |
(Input desired factor value.)
Skip this step if not necessary.
START
Skip this step if not necessary.
CANCEL
(Mode cancel)
This exits the editing mode.
16