Samsung CS29Z50 manual Switching the Television On and Off, Placing the Television in Standby Mode

Remote Control (depending on the model)

➢Operation of remote control may be affected by bright artificial light near to the TV.



-54%

4 /

Used to increase or decrease the volume.

5MENU

Used to display the on-screen menu or return to the previous menu.

6▲/▼/◄/►

Used to control the cursor in the menu.

7S.MENU

Used to display the sound menu.

8TURBO

Used to select the turbo sound option.

9DUAL I-II

Used to select the sound mode.

0SOURCE

Used to display all of the available video sources.

!INFO

Used to view the channel information and setting status you selected.

@PRE-CHUsed to switch repeatedly between the last two channels displayed.

#P /

Used to display the next or previous stored channel.

Installing Batteries

$ EXIT

Used to exit from any display or return to normal viewing.

%MUTE

Used to switch the sound off temporarily. To turn the sound back on, press the MUTE, , or button.

^ENTER

While using the on-screen menus, press the ENTER button to activate (or change) a particular item.

&S.MODE

Used to select the sound effect.

*P.MODE

Used to select the picture effect.

( TV

Used to return to the TV mode when it is in external input mode.

) EZ.VIEW Used to make TV viewing much easier.

Switching the Television On and Off

The mains lead is attached to the rear of the television.

1Plug the mains lead into an appropriate socket.

➢The main voltage is indicated on the rear of the television and the frequency is 50 or 60Hz.

2Press the “I” button (On/Off) on the front (or side) of the television.

3Press the POWER button on the remote control to switch the television on. The programme that you were watching last is re-selected automatically. If you have not yet stored any channels, no clear picture appears. Refer to “Channel - Auto Store” on page 3 or “Channel - Manual Store” on page 4.

➢If the television is initially powered on, several basic customer settings proceed automatically. Refer to “Setup - Plug & Play” on page 3.

4To switch the television off, press the “I” button (On/Off) on the front (or side) of the television.

Placing the Television in Standby Mode

The television can be placed in standby mode, in order to reduce power consumption and wear of the cathode ray tube. Standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).

1Press the POWER button on the remote control while viewing.

The television is in standby mode.

➢Caution : One pole switch is totally not off(one line still live) if power cord is not unplugged.

2To switch the television back on, simply press it again.

1POWER

Used to switch the TV on and off.

2Numeric buttons Used to select channels directly.

3-/--

Used to select a channel numbered ten or over. Press this button, then “--” symbol is displayed. Enter the two-digit channel number.

Remove the cover. Install two AAA size batteries, then replace the cover. When the remote control does not operate normally, check that the

“+” and “-” ends of the batteries are

inserted correctly or the batteries are drained.

➢Do not mix battery types, i.e. alkaline and manganese.

☛Do not leave the television in standby mode for long periods of time (when you are away on holiday, for example). Turn the television off by pressing the “I” button (On/Off) on the front (or side) of the television. It is best to unplug the set from the mains and aerial.

English -