Removing Excess Humidity
If the atmosphere in your room is very humid or damp, you can remove excess humidity without lowering the room temperature too much.
Remote Control | Control Panel | 1 | If necessary, press the |
| (On/Off) button. |
| |||||
|
|
|
Result: ◆ The air conditioner starts up in the Cool mode.
◆The unit beeps.
☛ | The air conditioner is fitted with a protection mechanism to pre- |
| vent the unit from being damaged when it is started immediately |
| after being: |
◆Plugged in
◆Stopped
It will start up normally after three minutes.
2If the temperature is not displayed on the control panel:
◆ Press the 
button on the remote control
or
◆Press the 
button on the unit one or more times until the
temperature is displayed.
Result: ◆ The unit beeps each time you press the 
/ 
button. ◆ The air conditioner starts up in the Cool mode.
➢You can change modes at any time.
3 To adjust the temperature, press the | or | buttons one or |
more times until the required temperature is displayed. | ||
Possible temperatures are between 64°F and 86°F inclusive. | ||
Result: ◆ Each time you press the | or | buttons: |
- The temperature is adjusted by 1°F - The unit beeps
◆ The air conditioner starts removing the excess humidity; the quantity of air is adjusted automatically.
4To control the direction of the air flow, refer to page 11.
