2
Instructions
Use this camera in the following order
Insert the
USB cable
Set up the
camera driver
Before connecting the camera to a PC, via the
USB cable, you will need to set up the camera
driver. Install the camera driver that is contained in
the Application S/W CD-ROM.(p.79)
Take a picture (p.21)
Insert the supplied USB cable into the PC’s USB
port and the camera’s USB connection
terminal.(p.87)
Check the camera’s power
If the power is turned off, press the camera button
to power it on.(p.25)
Take a picture
Check the
camera’s power
Check
[Removable Disk]
Open Window s EXPLORER and search for
[Removable Disk].(p.88)
To play back a video shot with this camera, be sure to use the QuickTime player supplied on
the software CD-ROM. Applications that do not support the MPEG-4 codec (e.g., Windows
Media Player) may not be able to play back the video.
If you use a card reader to copy the images on the memory card to your PC, there is a small
risk that the images could be damaged. When transferring the images taken with the camera
to your PC, be sure to use the supplied USB cable to connect the camera to your PC.
Please note that the manufacturer holds no responsibility for loss or damage of images on
the memory card due to the use of a card reader.