setting up your dishwasher
Control panel
DMR77 Series
1 | 2 | 3 | 4 |
|
| Displays the remaining wash time, any wash information (Delay start, Sanitize, | |
1 | DISPLAY | Half load, Child lock), and error messages (Rinse refill, error). | |
If an error occurs during an operation, an error message is displayed with a | |||
|
| ||
|
| warning sound. Refer to the information codes page. | |
|
|
| |
2 | DELAY START | Delay a cycle for up to 24 hours in | |
indicates the time at which the wash will be started. | |||
|
| ||
|
|
| |
|
| The temperature rises to 162 ˚F (72 ˚C) in the final rinse cycle for high | |
|
| temperature sanitization. | |
|
| If you select the Sanitize option, the “Sanitize” indicator blinks when the water | |
|
| temperature meets the sanitary temperature (over 155 ˚F (68 ˚C)), and then | |
3 | SANITIZE | illuminates for 10 minutes at the end of the cycle while it sanitizes. | |
The Sanitize feature is in accordance with NSF/ANSI Standard 184 | |||
|
| ||
|
| for Residential Dishwashers. Certified residential dishwashers are not | |
|
| intended for licensed food establishments. Your dishwasher is NSF | |
|
| Certified. The cycle that is NSF certified is the Heavy Cycle with the | |
|
| sanitize option selected. | |
|
|
| |
|
| Select this option to wash a small load of dishes. It is recommended that | |
|
| dishes are placed in the upper rack for this feature. | |
4 | HALF LOAD | When Half Load is selected, the dishes placed in the lower rack will not | |
be washed. Only the dishes in the upper rack will be washed. | |||
|
|
If you select the Half Load option, both water and electricity consumption are reduced.