Samsung DMT800 Series, DMT800RHS manual Information codes, Code Symbol Meaning Solution

Information codes

The Control Panel displays information codes to help you understand what is occurring with your dishwasher. If you see any of the codes listed below, you should select the Cancel and Drain option, and then follow the instructions in the Solution column.

CODE SYMBOL	MEANING	SOLUTION
	Temperature Sensor error
	Heater error	Functional error. With the dishwasher empty, add
		detergent, and then run a cycle.
	High temperature Heating error
		If the problem continues, go to your house
		circuit breaker panel, set the dishwasher’s
		circuit breaker switch to off, and then contact an
	Low water level error
		authorized Samsung service center.
	Half load function error
	Water supply error	Check whether the water supply valve is closed,
		the water supply is suspended, or the water
		inlet valve or line is frozen or clogged by foreign
		particles.
		If the problem continues, close the water supply
		valve, and then contact an authorized Samsung
		service center.
	High temperature Water supply	Check the temperature of the supplied water. If
	error	it is higher than 176 ˚F (80 ˚C), a functional error
		may occur with the dishwasher.
	Drain error	Check whether the drain hose is clogged or
		folded. If the problem continues, close the water
		supply valve, and then contact an authorized
		Samsung service center.
	Over-level water error	Functional error. Close the water supply valve
		and go to your house circuit breaker panel, set
		the dishwasher’s circuit breaker switch to off,
	Leakage
		and then contact an authorized Samsung service
		center.
	Button error	Functional error. Turn off the dishwasher and try
		to start it again.
		If the problem continues, contact an authorized
		Samsung service center.

For any codes not listed above, call 1-800-SAMSUNG (726-7864)

26_ troubleshooting