Samsung DS-2100B Things You Should Know , Outside Calls

Things You Should Know

• Lines from the Telephone Company are “C.O. lines.” Calls on these lines are referred

to as “outside calls.”

• Lines may be assigned to groups. When they are in a group, you access a line by dial-

ling a group access code (e.g. to dial an outside line).

• DCS provides distinctive ring patterns to your keyset. These are specific to the coun-

try in which you reside. For example, in the UK:

− Outside calls have a double ring tone repeated.

− Internal calls have a single ring tone repeated.

Note that some features described in this guide may not be supported by your system, or some feature codes may

have different values to those shown here. You should refer to the manuals supplied with your system, or your

system administrator, for more details if you are unsure.

With the handset on-hook, press the Speaker key. The Multi-Function lamp will light

steady when you are using the speakerphone.

In speakerphone mode, pressing the Speaker key will answer or release a call on your

keyset.

Outside Calls

• Lift the handset or press the Speaker key and dial the outside line access code.

(Check with your system administrator which single digit code to use—normally 0 o r

9—and enter it in the system access code table on the back page.)

• Dial the telephone number required.

• Finish the call by replacing the handset or pressi ng the Speaker key.

• Lift the handset and you are automatically connected to the caller.

• Press the Speaker key to answer the call through the speakerphone.

While on an outside call, press TRSF and dial 49 to send a flash to the telephone com-

pany.