DESCRIPTION
Front Panel
DESCRIPTION
Rear Panel
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |
1. | This key is used to turn the receiver on and off (Standby). |
2.7 Segment Display This LED display will show the current channel number.
While the receiver is in Standby mode, the display will show the current time.
3.Infrared Sensor This is to receive the IR commands from the Remote Control Unit.
4. | EXIT | This is for exiting a menu or returning to the previous menu or exiting |
|
| some banners. |
5. MENU | This is for opening up the menu or returning to the previous menu. | |
6. OK | This is for entering and confirming any data to the receiver in the | |
|
| menu system. This key is for selecting the item. |
7. | , | These keys are used to change the channels. |
8. | , | These keys are used to increase and decrease the volume level |
|
| manually. |
9. | Card Slot | Slot for smartcard. |
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
1. MODEM |
| Modem is a terminal which shares a line with a phone using splitter. | ||||||
|
|
| It is used for handling PPV and transferring subscription information. | |||||
2. RF OUT |
| This is used to connect to your TV via RF cable. |
|
| ||||
3. | RF IN |
| Use to connect a terrestrial antenna. |
|
| |||
4. | TV |
| This is used to connect to your TV. |
|
|
| ||
5. VCR |
| This is used to connect to your VCR. |
|
| ||||
6.VIDEO, AUDIO L/R These RCA connectors are for connecting any external video and audio.
7. | SPDIF | Output for connection to a digital amplifier. |
8. |
| This is used to connect your receiver to a computer for reading and |
|
| loading data information. |
GB
D | i | g | i | t | a | l | T | e | r | r | e | s | t | r | i | a | l | R | e | c | e | i | v | e | r |
