Samsung DV337AGG user manual Operating Instructions, tips, Overview of the Control Panel

operating Instructions, tips

OVERVIEW OF THE CONTROL PANEL

1 7 2 3 6 4 5 789 10

The display window shows the estimated time remaining in the cycle after the Start/Pause button is pressed. The estimated time remaining may fluctuate as the cycle progresses.

		The Drying light will illuminate and remain lit until the cycle is complete.
	Digital Graphic	When your dryer is in the cool-down phase, the Cooling light will illuminate.
1		When your dryer is in the wrinkle prevent phase, the Wrinkle Prevent light will
	Display
		illuminate.
		When the cycle is complete, “END” will appear in the display panel until the
		dryer door is opened or Power key is pushed.
		If your dryer is paused during a cycle, the indicator lights will blink until the
		Start/Pause button is pressed.
		To select the dry level in the Normal, Heavy Duty, or other Sensor Dry cycles,
		press the Dry Level button. An indicator light will illuminate next to the desired
		dryness level.
	Dry Level	Press the button repeatedly to scroll through the settings. Larger or bulkier
		loads may require the Very Dry or More Dry setting for complete dryness.
	Selection Button
2		The Less Dry setting is best suited for lightweight fabrics or for leaving some
		moisture in the clothing at the end of the cycle. Damp Dry is designed to
		partially dry items.
		Use for items that lay flat or hang to dry.
		To select the correct temperature for the load, press the Temp button. An
		indicator light will illuminate next to the desired temperature. Press the button
		repeatedly to scroll through the settings.
		High – For sturdy cottons or those labeled Tumble Dry.
	Temp Selection	Medium – For permanent press, synthetics, lightweight cottons, or items
3	Button	labeled Tumble Dry Medium.
		Medium Low – For lower heat than Medium to dry synthetic or washable knit
		fabrics.
		Low – For heat sensitive items labeled Tumble Dry Low or Tumble Dry Warm.
		Extra Low – Provides the lowest heated dry temperature possible.
		When using Manual Dry cycles, time can be adjusted by pressing the time
	Time Selection	selection button.
4	Button	During the Sensory Dry cycle, the time light indicator is off because exact
		drying times are determined by fluctuating humidity levels.

18_ Operating Instructions, Tips