Samsung DV338AGW, DV338AEW user manual Operating Instructions, tips, Overview of the Control Panel

operating Instructions, tips

OVERVIEW OF THE CONTROL PANEL

1 7 2 345 6 789 10

		The display window shows the estimated time remaining in the cycle after the
		Start/Pause button is pressed. The estimated time remaining may fluctuate as
		the cycle progresses.
		The Drying light will illuminate and remain lit until the cycle is complete.
	Digital Graphic	When your Dryer is in the cool-down phase, the Cooling light will illuminate.
1		When your Dryer is in the wrinkle prevent phase, the Wrinkle Prevent light will
	Display
		illuminate.
		When the cycle is complete, “END” will appear in the display panel until the
		Dryer door is opened or the Power key is pushed.
		If your Dryer is paused during a cycle, the indicator lights will blink until the
		Start/Pause button is pressed.
		To select the dry level in the Normal, Heavy Duty, or other Sensor Dry cycles,
		press the Dry Level button. An indicator light will illuminate next to the desired
		dryness level.
2	Dry Level	Press the button repeatedly to scroll through the settings. Larger or bulkier
	Selection Button	loads may require the More Dry setting for complete dryness.
		The Less Dry setting is best suited for lightweight fabrics or for leaving some
		moisture in the clothing at the end of the cycle.
		Use for items that lay flat or hang to dry.
		To select the correct temperature for the load, press the Temp button. An
		indicator light will illuminate next to the desired temperature. Press the button
		repeatedly to scroll through the settings.
3	Temp Selection	High – For sturdy cottons or those labeled Tumble Dry.
	Button	Medium – For permanent press, synthetics, lightweight cottons, or items
		labeled Tumble Dry Medium.
		Low – For heat sensitive items labeled Tumble Dry Low or Tumble Dry Warm.
		Extra Low – Provides the lowest heated dry temperature possible.
		Wrinkle Prevent provides approximately 90 minutes of intermittent tumbling
		in unheated air at the end of the cycle to reduce wrinkling. Press the Wrinkle
	Wrinkle Prevent	Prevent button to activate this feature.
4		The indicator light above the pad will illuminate when Wrinkle Prevent is
	Selection Button
		selected.

The load is dry, and can be removed at any time during the Wrinkle Prevent cycle.

operating Instructions, tips _21

02 operating Instructions, tips

DV338AER-02571A_EN.indd 21

2008-02-14 ¿ÀÈÄ 4:23:46