29
ENGLISHENGLISH
28
ENGLISHENGLISH
Playing a Disc Playing a Disc
After plugging in the player, the first time you press the POWER button, this screen comes up:
Press the UP/DOWN buttons to select the language, and then press the ENTER button.
(This screen will only appear when you plug in the player for the first time.)
If the language for the startup screen is not set, the settings may change whenever you turn the power
on or off.Therefore, make sure that you select the language you want to use.
1. Press the OPEN button to open the disc cover.
The disc cover opens up to around a 60-degree angle.
Do not attempt to open the cover to an angle beyond this range.The cover may become damaged.
2. Place a disc gently into the tray.
You should hear and feel the disc snap firmly into place.
Caution
Place a disc into the tray with the discs label facing up.
3.Close the disc cover and then press the part marked PUSHuntil it clicks shut.
4.Stopping Play
Press the STOP ( ) button during play.
5.Pausing Play
Press the PAUSE ( ) button on the remote during play.
- Screen stops, no sound.
- To resume, press PLAY ( ) button once again.