9
Description-Rear Panel
1DIGITALAUDIO OUT JACK
• Use an optical or coxial digital cable to connect to a compatible Dolby Digital receiver.
Use to connect to an A/V Amplifier that contains a Dolby Digital decoder or DTS decoder.
2 ANALOG AUDIO OUT JACKS
• Connect to the Audio input jacks of your television, audio/video receiver, or VCR.
3VIDEO OUTJACK
• Use a video cable to connect to the Video input jack on your television.
4S-VIDEO OUTJACK
• Use the S-Video cable to connect this jack to the S-Video jack on your television for
a higher quality picture.
5COMPONENTVIDEO OUT JACKS
• Use these jacks if you have a TV with Component Video in jacks. These jacks provide Pr,
Pb and Yvideo. Along with S-Video, Component Video provides the best picture quality.
Rear Panel Jacks
1 2 3 4 5
8
Front Panel Display
Description-Front Panel
123 4 5 6 7 8 9
1STANDBY/ON
•When the unit is first plugged in,
this indicator lights.
2NUON PORTS
•Allow you to plug in a joystick or other
peripherals.
3DISPLAY
•Operation indicators are displayed here.
4DISC TRAY
•Press OPEN/CLOSE to open and close
the disc tray.
5OPEN/CLOSE
•Press to open and close the disc tray.
6SCREEN FIT
•Allows you to eliminate the black bars
of the screen and fill any TV screen
completely with the picture.
7PLAY/PAUSE
•Begin or pause disc play.
8STOP
•Stops disc play.
9SKIP
•Use to skip chapters or tracks.
Front Panel Controls
1Angle indicator. You can select
multiple angles of a scene recorded
by different cameras.
2Disc type indicators
3Reverse play / Pause / Forward play
4Lights when 3D surround is turned on.
5Title number
6Chapter number.
7Video/Audio CD : Track number
8Repeat play mode
9Linear PCM audio output
10 Dolby Digital Audio output
11 DTS (Digital Theater System) output
12 MP3 indicator
13 MPEG-2 Audio output
14 Displays various messages
concerning operations such as PLAY,
STOP, LOAD, ...
no DISC: No disc loaded.
OPEN: The disc tray is open.
LOAD: Player is loading disc
information.
HDCD: When an HDCD®
recording is detected,
the letters “HDCD” will flash
for about 10 seconds
at the beginning of every
track.