ENG-11ENG-10
Choosing a Connection

Connection to a TV (For Video)

TV (Normal, Widescreen, Projection, etc..)
Method 1
DVD Player + TV with Video Input Jack
(The Video Output in Setup Menu must be set to S-Video, SCART Output or Component (I-SCAN).)
Method 2
DVD Player + TV with S-Video Input Jack
(The Video Output in Setup Menu must be set to S-Video.)
Method 3
DVD Player + TV with Scart Input Jacks (Audio & Video)
(The Video Output in Setup Menu must be set to SCART Output.)
Method 4
DVD Player + TV with interlace Scan Component Video Jacks
(The Video Output in Setup Menu must be set to Component (I-SCAN).)
Method 5
DVD Player + TV with Progressive Scan Component Video Jacks.
(The Video Output in Setup Menu must be set to Component (P-SCAN).)
• If you want to convert Video Output to the Progressive Scan, you have to first connect Video or S-Video on
your TV.Then select Component (P-SCAN)(480p) out of Video Output in Setup Menu.Within 10 seconds,
change the TV’s external input to 525p(480p or Component) and select “Yes”(See Page 29).
• If Component (P-SCAN) Video Output is selected in Setup Menu, Video(Composite) and S-Video will not work.
Impor
Important Note
tant Note
•
Consult your TV User’s Manual to find out if your TV supports Progressive Scan.If Progressive Scan is supported,
follow the TV User’s Manual’s instructions regarding Progressive Scan settings in the TV’s menu system.
• Depending on your TV, the Method of connection may differ from the illustration above.
RL
ANALOG AUDIO OUT
Pr Pb Y
S-VIDEO OUT
VIDEO OUT COMPONENT VIDEO OUT
Pr Pb Y
COMPONENT VIDEO OUT
Good
picture Better
picture Best
picture Optimum
picture
Basic Audio
OR OR OR
TV
DVD
Player
Method 1 Method 2 Method 4
Best
picture
Method 3 Method 5
Choosing a Connection

The following shows examples of connections commonly used to connect the DVD player with a TV

and other components.

Before Connecting the DVD Player

• Always turn off the DVD player, TV, and other components before you connect or disconnect any cables.
• If you connected an external Audio System, turn on your Audio System and set it to the correct Audio Input.
• Refer to the owner’s manual of the additional components you are connecting for more information on those
particular components.

Connection to an Audio

Method 1 Method 2
RL
ANALOG AUDIO OUT
COAXIAL
OPTICAL
Analog Audio Out Jacks Digital Audio Out Jack
OR
2ch Amplifier
Audio Input Jacks
Dolby Digital Decoder
Digital Audio Input Jack
AUDIO
SYSTEM
DVD
Player
DVD-P247A only
AV
Cable S-Video
Cable
Scart
Cables
(not
supplied)
Video
Cables
Audio Output
Jacks Video Output
Jack S-Video
Jack SCART Jack Component Video
Jacks
(Interlace)
Component Video
Jacks
(Progressive)