REFERENCE

Firmware upgrade

Please read the below information before update procedure.

Introduction

The following events may interrupt the update procedure and may result in permanent damage to DVD-Player

•Unplugging the power cord.

•Power outage.

•Dirt or Scratch in the discs.

•Open a tray door during processing. Playback can only support English Subtitle.

If you have any question or any problem, please feel free to contact your nearest SAMSUNG Service Center and agency.

How to make an upgrade disc

Write the downloaded file onto a blank CD-R disc, using the following settings.

2.READING appears at the left upper side of the screen.

READING

3 ERASE and WRITE appears in turn at the same location for about 40 sec during firmware update

ERASE

RETR 00

4.It will be displayed DONE if the update is com pleted successfully.

1.Download the software update file from the Samsung Internet Site (http://www.samsung.com) After checking your DVD-Player Model name on the rear, download a file using the Search Your Model/Name window

2.Write the file to disc using CD-R driver of your computer.Software update file name:

NP7CA.rom Please do not change the file name. If you change the file name, DVD-PLAY ER do not recognize the update CD-R.

Note

•Recommended Application Program

-Nero Burning / Easy CD Creator.. etc

•Option

-Multisession; No Multisession

-CD close or Finalized CD

Update procedure

1.Insert the update CD-R disc with the software update. It takes about 10 seconds to load the update disc.

DONE

RETR 00

5.If the unit was succesfully updated, the unit will turn off eject the update disc by using the OPEN/CLOSE button once the unit turns on.

6.Firmware update is ended. Turn on your player

Code Ver :xxxxx

Servo Ver:xxxxx

In order to check new version like the upper, press the INFO button after opening a tray.

Note

-The display can be changed depend on its version and without any notice.

28