Connection to a TV (Progressive)

1

Using component video cables (not included), connect the COMPONENT VIDEO OUT terminal on the rear of the DVD player to the COMPONENT IN terminal of TV.

2

Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the DVD player to the AUDIO (red and white) IN terminals of TV. Turn on the DVD player and TV.

3

Press the TV/VIDEO button on the TV's remote control to

select Component or DVD.

4

Set the Video Output to (P-SCAN)in the Display Setup menu. (See pages 26 to 27)

To see the progressive video output,

RED BLUE GREEN

RED WHITE

Audio Cable

Component Cable

(Not Included)

RED WHITE RED BLUE GREEN

-Consult your TV User’s Manual to find out if your TV supports Progressive Scan. If Progressive You need a TV set suppo ting the progressive scan

Scan is

follow the TV User’s Manual regarding Progressive Scan settings in the TV’s

input

function.supported,And you have to set up the TV

menu system.

- Depending on your TV, the connection method may differ from the illustration above.

Note

-What is "Progressive Scan"?

Progressive scan has twice as many scanning lines as the interlace output method has. Progressive scanning method can provide better and clearer picture quality.

12