CO N N E C T I O N S

Connection to an Audio System (2 Channel Amplifier)

1

Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the DVD player to the AUDIO (red and white) IN terminals of the Amplifier.

2

Using the video signal cable(s), connect the VIDEO, S-VIDEOor COMPONENT OUT terminals on the rear of the DVD player to the VIDEO, S-VIDEOor COMPONENT IN terminal of your TV as described on pages 11 to 14.

3

Turn on the DVD player, TV, and Amplifier.

4

Press the input select button of the Amplifier to select external input in order to hear sound from the DVD player.

Refer to your Amplifier's user manual to set the Amplifier's audio input.

2-Channel stereo amp

REDWHITE

Audio Cable

REDWHITE

Connections

Note

-Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause damage to the speakers and your ears.

-Please set the audio in the menu screen according to the Amplifier.(See pages 51 to 52)

-The position of terminals may vary depending on the Amplifier. Please refer to the user's manual of the Amplifier.

ENG-15