ENG-4
Install Batteries in the Remote control
1
Open the battery
cover on the back of
the remote control.
2
Insert two AAAbatteries.
Make sure that the
polarities (+ and -) are
aligned correctly.
3
Replace the battery
cover.
If the remote control doesn’t operate properly:
- Check the polarity + - of the batteries (Dry-Cell)
- Check if the batteries are drained.
- Check if remote control sensor is blocked by obstacles.
- Check if there is any fluorescent lighting nearby.
Before you start
Accessories
Remote
Control Batteries for
Remote Control
(AAA Size)
Users Manual Video/Audio
Cable
00708C_P450_XSS_eng_1 2/26/05 10:31 PM Page 4