Getting started

Charging the battery pack

Charge the battery before using the battery pack for the first time or when the battery pack has been unused for extended periods.

Use only Samsung-approved chargers and cables. Unapproved chargers or cables can cause the battery to explode or damage the battery pack.

1 Connect the battery pack to the USB power adapter via the USB cable. Plug the USB power adapter into an electric socket.

Connecting the charger improperly may cause serious damage to the battery pack. Any damage caused by misuse is not covered by the warranty.

You can charge the battery pack using the charger (sold separately).

• Using a power source other than the charger, such as a computer, may result in a slower charging speed due to a lower electric current.

The battery pack can be used while it is charging, but it may take longer to fully charge the battery.

While charging, the battery pack may heat up. This is normal and should not affect the battery pack’s lifespan or performance. If the battery gets hotter than usual, the charger may stop charging.

The actual capacity (Wh) is measured based on the battery’s output current and voltage. It may differ from the capacity (Wh) indicated on the device, depending on the output power condition, the connected device’s circuit configuration, and the operation environment.

If the battery pack is not charging properly, take the battery pack and the charger to a Samsung Service Center.

English (USA)

5

3