+/- button

Exposure compensation

:This camera automatically adjusts the exposure according to the ambient lighting conditions. You can also select the exposure value by using the +/- button.

Compensating Exposure

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1. Press the +/- button, and then use the UP and DOWN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

buttons to select the exposure compensation icon (

).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The exposure compensation menu bar will appear as

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

shown.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2. Use the LEFT and RIGHT buttons to set the desired

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

exposure compensation factor.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3. Press the +/- button again. The value you set will be

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

saved and the Exposure Compensation setup mode will

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

close. If you change the exposure value, the exposure indicator (

) will be displayed on

the bottom of the LCD monitor.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

*A negative exposure compensation value reduces the exposure.

Note that a positive exposure compensation value increases the exposure and the LCD monitor will appear white or you may not get good pictures.

34