Setting up the recording function using the camera buttons
Drive mode
You can select continuous shot, and AEB (Auto Exposure Bracketing).
[Single] () | : Take one picture only. |
|
[Continuous] () | : Images will be taken |
|
| continuously until |
|
| the shutter button is | DRIVE |
| released. | |
|
| |
[AEB] () | : Take three pictures | Single |
|
in a series in different exposures: standard exposure (0.0EV), short exposure
Use this function when you cannot determine the exposure value of subject.
[Motion Capture] () : This takes 6 shots per second, and for max 5 seconds, when the shutter is pressed and held down. The maximum number of shots is 30 and the image size is fixed as VGA.
High resolution and picture quality increases file saving time, which increases
If the [Continuous], [AEB] or [Motion Capture] sub menu is selected, the flash will be automatically switched off.
If less than 3 pictures are available in the memory, the [AEB] shooting is not available.
It is best to use a tripod for the [AEB] shooting as the time to save each image file is longer and blurring caused by camera shake may occur.
If less than 30 pictures are available in the memory, the [Motion Capture] shooting is not available.
ISO
You can select the ISO sensitivity when taking pictures.The speed or specific[Auto] () : The camera’s sensitivity is |
|
automatically changed by |
|
variables such as lighting value |
|
or subject brightness. |
|
[ISO 80, 100, 200, 400, 800, 1600] | ISO |
| |
() : | Auto |
the same amount of light is present, by increasing the ISO sensitivity. However, the image may be saturated with light.
The higher the ISO value, the higher the camera’s sensitivity to light and therefore the greater its capacity to take pictures in dark conditions. However, the noise level in the image will increase as the ISO value increases, making the image appear coarse.
41