Thumbnail / Enlargement / Trimming button
Image enlargement
-Select an image that you want to enlarge and press the enlargement button.
-Different parts of the image can be viewed by pressing the 5 function button.
- Pressing the thumbnail button will zoom back to the original full sized image.
-The location indicator is in the bottom left side of the LCD monitor.
Trimming : You can extract part of the image that you want and save it separately.
- Select a section that you want to trim by pressing the 5 function button. Press the OK button and a message will be displayed as shown alongside.
- Select [YES] or [NO] by pressing the LEFT/ RIGHT button and press the OK button.
Selecting [YES] : a trimmed image that has the latest file name will be displayed on the LCD monitor.
Selecting [NO] : an initial image will be displayed.
INFORMATION
The maximum enlargement rate in proportion to the image size.
Image size | Large (Photo) | Middle | Small |
|
|
|
|
Maximum enlargement rate | X7.1 | X4.0 | X2.0 |
|
|
|
|
If an image is enlarged, the enlargement indicator will be displayed in the bottom left of the LCD monitor.
Movie clip, TIFF and WAV files can’t be enlarged.
You may notice a decrease in image quality when you enlarge them.
The image size of the trimmed image cannot be defined as it extracts only the part of the image displayed on the LCD monitor.
If there is little memory space to save the trimmed image, the image can’t be trimmed.
66