Digimax Reader
8.To save the section as a text, click the Save( 
) icon. A window as shown alongside will be
displayed.
9.Select a file type that you want to.
Selectable file type : *.TXT, *.HWP, *.DOC, *.RTF
INFORMATION
To get an image that can be recognized as a text :
-Keep a distance of 20cm between the subject and the camera.
-The subject need to be centered.
-Avoid the camera shake to get a good image.
Refer to the [Help] menu in Digimax Reader for further information.
FAQ
Please check the following if the USB connection malfunctions.
[Case 1] The camera power is off.
Turn the camera power on. We recommend using an AC power adapter in PC mode.
[Case 2] USB Driver is not installed correctly.
Install the USB Driver correctly. Refer to page 98.
[Case 3] The USB cable is not connected or you are using a cable with an incorrect specification.
Use a USB cable with the correct specification.
[Case 4] The camera is not recognized by your PC.
Sometimes, the camera may appear under [Unknown Devices] in Device Manager.
Install the camera driver correctly.
Turn off the camera, remove the USB cable, plug in the USB cable again, and then turn on the camera.
[Case 5] There is an unexpected error during file transfer
Turn the camera power off and on again. Transfer the file again.
118