￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿ ￿￿￿￿￿￿￿￿

￿

￿

￿

￿￿

￿￿

￿￿

￿￿￿

￿

BKT-Install

Fig1

Fig2

"A" side

BKT-Base

Fig3

Fig4

Fig5

FG87KST / FG87K

FW87KST / FW87K

Installation instructions microwave oven
generaltechnical information
Electrical supply:

230 V

 

 

 

AC, 50 Hz

 

 

Power consumption:2400 W (FG87KST/FG87K)

 

 

 

1250 W (FW87KST/FW87K)

 

 

Dimensions(w×h×d):595×380×360 mm (FG87KST/FG87K)

50

 

 

 

595×380×350 mm (FW87KST/FW87K)

 

 

This appliance complies with the EU regulations.disposal of packaging and applianceThe appliance's packaging is recyclable. The following can be used:- cardboard;- polyethylene film (PE);- CFC-free polystyrene(PS rigid foam).

Dispose of these materials in a responsible manner and in accordance with government regulations.

The authorities can provide you with information about how to dispose of discarded domestic appliances in a responsible manner.

safetyThe appliance should only be connected by a qualified technician.The microwave oven has been designed for domestic use.You should use it exclusively for cooking food.The appliance is hot during and after use.Bear this in mind if young children come anywhere near the appliance.Installation near to a conventional oven.

-Where a microwave oven is to be installed next to a conventional oven, sufficient space between them should be allowed to prevent overheating, as the surround can wrap with excessively high temperatures, Obviously,

it is important to adherent strictly to the conventional oven manufacturer's
Building-in dimensions

 

installation instructions.

 

-A built-in microwave oven must not be installed above a conventional

 

oven otherwise the microwave oven's cooling system may be adversely

 

affected by hot air produced by the conventional oven.

 

electrical connection

The house mains to which the appliance is connected should comply with national and local regulations.

If you wish to make a fixed connection, ensure that a multipolar switch with a minimum contact spacing of 3 mm is fitted in the supply line.

1.

Use the 3mm drill to make holes. Fix screws into BKT-Install. (Fig1)

EN

 

 

2.

Insert the microwave oven into the cabinet. (Fig2)

 

3. Use the template to place the BKT-Base 71mm away

 

 

from "A" side of the cabinet. (Fig3)

 

4.

Use the 3mm drill to make holes. Fix screws into BKT-Base. (Fig4)

 

5.

Attach the surround. (Fig5)

 

6.

Make the electrical connection. Check that the appliance work.