Installing Your Microwave Oven

 

Setting the Time

Place the oven on a flat level surface 85cm above the floor. The

Your microwave oven has an inbuilt clock. The time can be displayed

surface should be strong enough to safety bear the weight of the oven.

in either the 24-hour or 12-hour notation. You must set the clock:

EN

20cm

10cm

1. When you install your oven, make sure there is adequate

above

behind

ventilation for your oven by leaving at least 10 cm (4

 

 

 

 

inches) of space behind and, on the sides of the oven

85cm of

10cm

and 20 cm (8 inches) of space above.

the floor

on the side

 

2. Remove all packing materials inside the oven. Install the roller ring and turntable.

Check that the turntable rotates freely.

3.This microwave oven has to be positioned so that plug is accessible.

If the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent.

For your personal safety, plug the cable into a 3-pin, 230 Volt, 50Hz, AC earthed socket. If the power cable of this appliance is damaged, it must be replaced by a special cable.

Do not install the microwave oven in hot or damp surroundings like next to a traditional oven or radiator. The power supply specifications of the oven must be respected and any extension cable used must be of the same standard as the power cable supplied with the oven. Wipe the interior and the door seal with a damp cloth before using your microwave oven for the first time.

•When you first install your microwave oven

•After a power failure

Do not forget to reset the clock when you switch to and from summer and winter time.

1. To display the time

Then press the

in the...

 

button...

 

 

24-hour notation

Once

12-hour notation

Twice

2.Turn the dial knob to set hour.

3.Press the button.

4.Turn the dial knob to set minute.

5.Press the button.

5