Quick Start Guide
Bluetooth
Mono Headset
WEP430
Get connected in 4 quick steps
Charge your headset
Put your headset in pairing mode
Turn on Bluetooth on your phone and pair with headset
Test and use
Start here
Before using your headset
Thank you for purchasing the Samsung Bluetooth Mono Headset WEP430. We hope you will be delighted with its operation.
Take a moment before you get started to familiarize yourself with your new headset.
| ||
button |
| |
Primary | Indicator light | |
microphone | ||
| ||
Volume control | Adapter jack | |
buttons |
| |
Secondary | ||
microphone |
Check the accessories
Make sure you have the following items with your headset:
Adapter, User’s Guide
NOTE:
Your headset supports the Headset and/or
Charge your headset
Charge the headset's battery fully before using the headset for the first time.
1Put the adapter into the jack on the headset.
2Plug the adapter into an electrical outlet.
•Charge the headset until the red light on the headset turns to blue.
•The headset will be fully charged in approximately 2 hours and 30 minutes.
3Remove the adapter from the headset.
NOTE:
The headset is not able to operate while charging. Try connecting after charging is completed.
Headquarters:
1301 East Lookout Drive Suite 150
Richardson, TX 75082
Internet Address: http://www.samsungmobileusa.com/ accessories
Customer Care Center:
Guide No.:
10/2007. Rev. 1.0
Put your headset in pairing mode
Before you can use your headset, you must pair it with your phone.
•If you turn on the headset for the first time, it proceeds into pairing mode immediately.
•If you have paired the headset with other Bluetooth devices, make sure that the headset is off (see Turn headset on or off on the reverse side of this guide). Then press and hold the
Turn on Bluetooth on your phone and pair with headset
1Set your Bluetooth phone to discover the headset by following your phone's user guide.
Typically, the steps involve going to the Settings, Connection, or Bluetooth menu on your phone and then selecting the option to discover Bluetooth devices.
Your phone will find the Samsung WEP430 headset.
2Select Samsung WEP430.
3When the phone asks if you want to pair with it, confirm by selecting Yes or OK.
4Enter the headset passkey or PIN, 0000.
Test and use
Your phone and headset are now paired and ready to make and receive calls. To confirm they are operating properly, make a call:
1Place the headset over your ear.
See Wear the headset on the reverse side of this guide.
2On your phone, make a call to the number you want.
3If your phone and headset are successfully paired, you will hear ringing on the headset.
After you have successfully paired your phone and headset, you do not need to repeat these initial setup steps each time you use the headset.
Using your WEP430
See Features and Functions Guide on the reverse side of this guide
for information on using your WEP430.
