Inserting/Ejecting the battery and memory card
16
Getting Started
Inserting/ejecting a memory card (not supplied)
To insert a memory card
1 Slide, and then open the memory card cover as shown in
the figure.
2 Insert the memory card into the card slot until it softly clicks.
Make sure that the label portion of the card is facing up and the
camcorder is placed as shown in the figure.
3 Close the memory card cover.
•
To eject a memory card
1 Slide, and then open the memory card cover as shown in
the figure.
2 Gently push the memory card to eject it.
3 Close the memory card cover.
To avoid the data loss, turn off the camcorder by pressing and holding the [Home ( )] button before inserting or ejecting the memory card.
Be careful not to push the memory card too hard. The memory card may suddenly pop out.
•
•