Connecting External Component

Connecting the FM and AM Antennas

GB

 

If AM reception is poor, connect an outdoor AM antenna(not supplied).

Connecting Audio Component

Before moving or installing the product, be sure to turn off the power and disconnect the power cord.

 

AM Loop Antenna

 

(supplied)

 

FM Antenna (supplied)

CD Player

Snap the tabs on the loop into the

 

 

slots of the base to assemble the

 

AM loop antenna.

CONNECTIONS

FM antenna connectionAM antenna connection
1.Connect the FM antenna supplied to the FM75COAXIAL terminal as a temporary measure.

2.Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid surface.

1.Connect the AM loop antenna supplied to the AM and terminals.

2.If reception is poor, connect an outdoor single vinyl- covered wire to the AM terminal.

(Keep the AM loop antenna connected).

COOLING FAN

The cooling fan dissipates the heat generated inside the unit so that the unit can

be operated normally. The cooling fan is activated automatically to supply cool air

 

 

to the unit.

 

Please observe the following cautions for your safety.

 

• Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the

 

unit could rise and may damage it.

 

• Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are

 

covered with a newspaper or cloth, heat may build up inside the unit and fire may result.)

13

14