Samsung HT-BD1220R/XEF Audio setup, Setting UP the Speaker Options, Dynamic Compression, AV Sync

Audio setup

SETTING UP THE SPEAKER OPTIONS

Dynamic Compression

This is only active when a Dolby Digital signal is detected.		Music
• On : When Movie soundtracks are played at low volume or			System
			Language
from smaller speakers, the system can apply appropriate		Photo
	DVD	Setup Audio		◄	Dynamic Compression : On On			►
							Off
compression to make low-level content more intelligible and			Display		AV Sync	:	50msec
			HDMI		Test Tone
prevent dramatic passages from getting too loud.			Network		Speaker Distance

• Off : You can enjoy the movie with the standard Dynamic	Parental
	Sound Edit
Range.

AV Sync

Video may look slower than the audio when the player is		Music
connected to a digital TV. If this occurs, adjust the audio		System
		Photo		Dynamic Compression : On
		Language
delay time to match the video.	DVD	Setup Audio	◄	AV Sync	:	50msec0msec
		Display		Test Tone		25msec
• You can set the audio delay time between 0 ms and 300 ms.		HDMI		Speaker Distance		50msec
						75msec
Set it to the optimal status.		Network		Sound Edit
		Parental				100msec
						125msec

Setting the Test Tone
Use the Test Tone feature to check the speaker connections.
			Music
1.	With the unit in Stop mode, press the MENU button.		System
			Language
			Photo
2.	Press the ▲▼◄► buttons to select Setup, then press the	DVD	Setup Audio	◄	Dynamic Compression : On		►
			Display		AV Sync	: 50msec
	ENTER or ► button.		HDMI		Test Tone
3.	Press the ▲▼ buttons to select Audio, then press the		Network		Speaker Distance
			Parental
					Sound Edit

ENTER or ► button.

•Audio setup menu will be displayed.

4.Press the ▲▼ buttons to select Test Tone, then press the

ENTER or ► button.	Music	System		Dynamic Compression : On
	Photo
		Language		AV Sync	: 50msec
5. Press the RED(A) button
	DVDSetup	Audio	◄	Test Tone	►
• A test tone will be sent to L R LFE in order so you		Display		Speaker Distance
		HDMI		Sound Edit

can make sure the speakers are set up correctly.	Network
	Parental

6.To end the test tone, press the RED (A) button again.

M Press the RETURN button to return to the previous menu.

When playing a BD/DVD or CD, this will work only in Stop mode.

Use this function to check that each speaker is correctly connected and that there is no problem.

When HDMI AUDIO is on (audio is produced through TV speakers), the TEST TONE function is not available.

ENG

● AUDIO SETUP

37

HT-BD1220A_ELS_0729-2.indd 37 2009-07-29 ￿￿ 4:19:13