Getting Started
USB Host Specification
USB Host Specification
•Supports USB 1.1 or USB 2.0 compliant devices.
•Supports devices connected using the USB A type cable.
•Supports UMS (USB Mass Storage Device) V1.0 compliant devices.
•Supports FAT(FAT, FAT16, FAT32) file system formatting.
Non-compliance
•Does not support a device that requires installing a separate driver on the PC (Windows).
•Does not support connection to a USB hub.
•A USB device that is connected using an USB extension cable may not be recognized.
Operational Limitations
•If the connected device has multiple drives (or partitions) installed, only one drive
(or partition) can be connected.
•A device supporting USB 1.1 alone may cause a difference in the picture quality, depending on the device.
Supported file Formats
Format | Still Picture | Music |
|
|
|
File name | JPG | MP3 |
File extension | JPG .JPEG | .MP3 |
Bit rate | – | 80~384kbps |
Version | – | – |
Pixel | 640x480 | – |
Sampling Frequency | – | 44.1kHz |
•CBI (Control/Bulk/Interrupt) is not supported.
•Digital Cameras that use PTP protocol or require additional program installation when connected to a PC are not supported.
•A device using the NTFS file system is not supported. (Only the FAT 16/32 (File Allocation Table 16/32) file system is supported.)
•Does not operate with Janus enabled MTP (Media Transfer Protocol) devices.
USB Devices that can be used with the product
1.USB Storage Device
2.MP3 Player
3.Digital Camera
4.USB card Reader: One slot USB card reader and
•The USB card reader may not be supported, depending on the manufacturer.
•If you install multiple memory devices into a
✎NOTE
The external HDD device is not supported.
Accessories
Check for the supplied accessories below.
Video Cable
FM Antenna
User's Manual
Remote Control/ Batteries
(AAA size)
ASC Microphone
