Samsung HT-D5000/XE, HT-D5000/XN manual Method 1 Hdmi Best Quality, Hdmi Auto Detection Function

METHOD 1 : HDMI (BEST QUALITY)

Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI IN jack on your TV.

✎NOTE

Certain HDMI output resolutions may not work, depending on your TV.

After making the video connection, set the Video input source on your TV to match the corresponding Video output (HDMI, Component or Composite) on your product.

See your TV owner's manual for more information on how to select the TV's Video Input source.

If you have set the product's remote control to operate your TV, press the TV SOURCE button on the remote control and select HDMI as the external source of the TV.

You must have an HDMI connection to enjoy videos with 3D technology.

HDMI Auto Detection Function

1.Using an HDMI cable, connect the HDMI OUT terminal on the rear of the product to the HDMI IN terminal of your TV.

2.Turn on the product and TV.

For available HDMI video resolutions, see page 27.

•This function is not available if the HDMI cable does not support CEC.

•HDMI is an interface that enables the digital transmission of video and audio data with just a single connector. Using HDMI, the product transmits a digital video and audio signal and displays a vivid picture on a TV having an HDMI input jack.

•HDMI connection description

-HDMI outputs only a pure digital signal to the TV.

-If your TV does not support HDCP, random noise appears on the screen.

•What is the HDCP?

HDCP (High-band width Digital Content Protection) is a system for preventing BD/DVD content outputted via HDMI from being copied. It provides a secure digital link between a video source (PC, DVD. etc) and a display device (TV, projector. etc). Content is encrypted at the source device to prevent unauthorized copies from being made.

Attaching the Toroidal Ferrite Core to the Power Cord of the Main Unit

If you attach a Toroidal ferrite core to the power cord of the man unit, it will help to prevent RF interference from radio signals.

1.	Pull the fixing tab of the Toroidal ferrite core to	FM ANT	COMPONENT OUT	FRONT
	open it.			SPEAKERS OUT

2. Make a loop twice in the main unit power cord.		SUBWOOFER FRONT
	AUX IN VIDEO OUT	SPEAKER IMPEDANCE : 3

3.Attach the Toroidal ferrite core to the main unit power

cord as the figure shows and press it until it clicks.

02 Connections

English 19